Factory For Outdoor Wooden Lawn Tube lamp S1140-500 to Brisbane Manufacturer
Factory For Outdoor Wooden Lawn Tube lamp S1140-500 to Brisbane Manufacturer Detail:
Product detail pictures:
We'll dedicate ourselves to offering our esteemed customers together with the most enthusiastically thoughtful solutions for Factory For Outdoor Wooden Lawn Tube lamp S1140-500 to Brisbane Manufacturer, The product will supply to all over the world, such as: Frankfurt , Liberia , Serbia , now we have 8 years experience of production and 5 years experience in trading with the customers all over the world. our clients mainly distributed in the North America, Africa and Eastern Europe. we can supply high quality items with the very competitive price.
Cost: Around $20-30 Difficulty: Intermediate Required Skills: partial disassembly of a car’s interior, and use of a soldering iron
Looking for the giant clock video? http://www.youtube.com/watch?v=W_hOej7pYXQ
UPDATE: According to various comments, this will work for the current Honda Civic (or at least 2012 models) and will also work for the sedan. Make sure you test the wires first, though, in case something is different. If you’re going to try it on these models, make sure you find out how to remove the paneling–the process may have changed. Again, this video was made specifically for the North American 8th generation Civic Coupe, which covers model years 2006-2011. You will likely have to alter the procedure in some way for all other models.
This is my first how-to video, so please bear that in mind when you watch the video.
I’ve been wanting to install footwell lighting in my car (a 2009 Civic Coupe) for a little while, and instead of just doing it, I decided that I should record my progress and make a video of it for YouTube. Well, here it is.
This modification wasn’t nearly as difficult as it was time consuming. I mention in the video that it takes 1-2 hours to complete, however this is if you have access to all your materials at one time. I spread this out over a few days and ended up spending much more time then I thought it would take, just because of my start-and-stop schedule.
Basically, what makes these footwell lights unique is that they are tapped from the dome light’s power, so they will dim in and out with it. It took me a very long time to find the information on the series of tubes that is the Internet that showed where the dome light’s wires were. I have to thank the people at 8thcivic.com for contributing to a forum that eventually gave me all the info I needed.
Some users have reported compatibility issues with the wire taps/scotchlocks and the light strips. Ii is my recommendation to solder wires directly to the strips, either using the solder pads or the wires that may have come with your strips. However, for those who are apprehensive of using a soldering iron (after all it can be dangerous), be advised that you may have to use two sets of wire taps–one to make new wires from the OEM wires, and another to tap your lights to these new wires. Again, I always recommend soldering since it provides a better connection, both electrically and mechanically. But if you want to avoid soldering, just remember that you may need to find away around various problems.
TO ADD A SEPARATE SET OF LIGHTS that stays on whenever the ignition is on, use a fuse tap (which can be found at most auto parts stores) of the correct size. If I remember correctly, this is for the ATM fuses. The fuse tap does not need to be low-profile like the fuses are in the car. Tap the radio fuse, or any other fuse that does not receive power when the key is removed. Technically, the lights will be on when the key is in the ACC or ON positions. The radio fuse was the only fuse that I found worked. Use the smallest size fuse that came with the fuse tap for your new lights. Then, wire the positive for these lights to the fuse tap and ground them to something metal under the dashboard. I highlighted what I used to make a ground at 12:38–I simply used a zip-tie and some bare wire, looping the wire around the ring and securing it with the zip-tie.
DISCLAIMER: I will not be responsible for any damage that you cause to your vehicle as a result of performing this modification, nor will I be responsible for any voiding of warranties that may result from this modification, and nor will I be responsible for any local laws that may be broken by the use of footwell lighting. Since this footwell lighting only operates when a door is opened (the dome light switch does not make the footwell lights come on) or the car is being unlocked from the outside, I doubt it would break any laws. However, if there are laws prohibiting footwell lighting in your area, any fines or other consequences of breaking the laws shall not be my responsibility.
YOU CAN NOW GET A 5 METER STRIP OF THESE LIGHTS FOR ABOUT $15 ON AMAZON! Just search for LED Strip lights or Tape lights. You can also find them in waterproof versions. If you want to do more projects with these lights, look for them on Amazon. If you would like to add LED underglow, which I explain how to do in another video, I would order a waterproof 5 meter reel, and use a small portion for the footwell lights.
Besides the actual LEDs, most of the other materials required can be found around the house. Remember to always remove the fuse to the circuit you’ll be working on, and be sure to check that the fuse you removed does indeed protect your desired circuit.
Thanks for watching!
Trunk light video: http://www.youtube.com/watch?v=k_HXqIdIuMo
By Jean 2016-7-23 19:06
The after-sale warranty service is timely and thoughtful, encounter problems can be resolved very quickly, we feel reliable and secure.
By David 2015-12-13 16:53