factory customized OUTDOOR WOODEN LAMP Tube lamp WOODEN WALL LAMP S1070 to Uruguay Factory
factory customized OUTDOOR WOODEN LAMP Tube lamp WOODEN WALL LAMP S1070 to Uruguay Factory Detail:
Product detail pictures:
"Sincerity, Innovation, Rigorousness, and Efficiency" could be the persistent conception of our business for your long-term to develop with each other with prospects for mutual reciprocity and mutual profit for factory customized OUTDOOR WOODEN LAMP Tube lamp WOODEN WALL LAMP S1070 to Uruguay Factory, The product will supply to all over the world, such as: Cambodia , Sudan , Bangladesh , Since the establishment of our company, we've realized the importance of providing good quality products and the best before-sales and after-sales services. Most problems between global suppliers and clients are due to poor communication. Culturally, suppliers can be reluctant to question things they do not understand. We break down all those barriers to ensure you get what you want to the level you expect, when you want it.
Check out our new Facebook group: https://www.fb.com/groups/EuropeanHeadlightFanatics/
The Audi A4 B7 is a very classic car with a luxurious appearance. Your car didn’t came out of the Audi factory with OEM xenon headlights? No need to worry. With our Bi-xenon mini H1 twin kit it’s now possible to transform your headlights to true Bi-xenon projectors! Check out our full instruction video on how to retrofit your headlight with these awesome projectors and compete with OEM setups for a fraction of their cost!
0:01 Remove the caps from the rear
0:05 Bake the headlight to soften the sealing
0:11 We put the headlight in a carton box and heat it
0:15 1600 Watt heatgun for 16 minutes
0:23 Remove the lens clips and rubber
0:44 Seperate the lens from the housing using a flat screw driver
1:14 Remove the H7 halogen bulb cap
1:20 break off the cap channel with a plier
1:28 Place the small rubber washer over the projector shaft
1:33 Insert the Bi-xenon solenoid wires through the cap shaft and insert the projector through the fitting
1:43 Place the H7 adapter ring and secure the projector nut
1:59 Don’t tighten it fully yet, you might want to do some final rotational adjustment when the headlights are mounted on the car
2:04 Mount the bulb holder
2:20 Click the shroud centric ring inside the shroud (this shroud has been modified for fitment)
2:23 Apply a few drops of glue to be sure the shroud will stay on
2:50 Remove all finger prints using a fine cloth
3:00 If you want, apply some butyl to make sure the headlight will be free of moisture
3:20 Press the lens on the housing and bake it again
3:48 Now that the sealant is soft, press the lens on the housing using pliers and secure the lens by placing the metal clips
4:17 Place the solenoid plug back on the wires
4:25 Connect the H7 high beam splitter for the solenoid to function together with the H7 halogen high beam
4:49 Drill a 20-22mm hole in the bulb cap to guide the wires through
5:16 The wires will be connected to the ballast and H7 low beam plug. Because the Audi A4 B7 has Canbus, this is the only wiring setup that can be used
5:22 Insert the bulb in the projector and secure it with the clip
5:48 Connect the 12V ballast wires correctly, red to the yellow cable (+ positive) and black to brown (- negative)
6:07 Click the cap back on, you are ready to do mount the headlight to the car and enjoy a luxurious Bi-xenon projector headlight!
Unboxing – Skate Wood Light Agressive “Loja Kanui” (Shape errado e truck quebrado=Insatisfação)!
Pois é, o desenho do shape errado, cheio de pancadas e com o truck quebrado!
By Elaine 2016-9-22 16:22
Hope that the company could stick to the enterprise spirit of "Quality, Efficiency, Innovation and Integrity", it will be better and better in the future.
By Antonio 2016-9-15 12:57