12 Years Manufacturer Outdoor Wooden Lawn Garden Lamp 64230 to Rome Importers

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

We usually think and practice corresponding to your change of circumstance, and grow up. We goal at the achievement of a richer mind and body plus the living for Lamp In Lawn , Led Lighting Commercial , Floor Lighting Gold , Being a young increasing organization, we might not the best, but we have been trying our best for being your very good partner.
12 Years Manufacturer Outdoor Wooden Lawn Garden Lamp 64230 to Rome Importers Detail:


Product detail pictures:

12 Years Manufacturer
 Outdoor Wooden Lawn Garden Lamp 64230 to Rome Importers detail pictures


Our eternal pursuits are the attitude of "regard the market, regard the custom, regard the science" along with the theory of "quality the basic, have confidence in the first and administration the advanced" for 12 Years Manufacturer Outdoor Wooden Lawn Garden Lamp 64230 to Rome Importers, The product will supply to all over the world, such as: Ghana , Swiss , Adelaide , We will supply much better merchandise with diversified designs and experienced services. We sincerely welcome friends from over the world to visit our company and cooperate with us on the basis of long-term and mutual benefits.


  • http://www.retrofitlab.com/projector-kits/bi-xenon-mini-h1-twin-kit-1.html
    Check out our new Facebook group: https://www.fb.com/groups/EuropeanHeadlightFanatics/

    The Audi A4 B7 is a very classic car with a luxurious appearance. Your car didn’t came out of the Audi factory with OEM xenon headlights? No need to worry. With our Bi-xenon mini H1 twin kit it’s now possible to transform your headlights to true Bi-xenon projectors! Check out our full instruction video on how to retrofit your headlight with these awesome projectors and compete with OEM setups for a fraction of their cost!

    0:01 Remove the caps from the rear
    0:05 Bake the headlight to soften the sealing
    0:11 We put the headlight in a carton box and heat it
    0:15 1600 Watt heatgun for 16 minutes
    0:23 Remove the lens clips and rubber
    0:44 Seperate the lens from the housing using a flat screw driver
    1:14 Remove the H7 halogen bulb cap
    1:20 break off the cap channel with a plier
    1:28 Place the small rubber washer over the projector shaft
    1:33 Insert the Bi-xenon solenoid wires through the cap shaft and insert the projector through the fitting
    1:43 Place the H7 adapter ring and secure the projector nut
    1:59 Don’t tighten it fully yet, you might want to do some final rotational adjustment when the headlights are mounted on the car
    2:04 Mount the bulb holder
    2:20 Click the shroud centric ring inside the shroud (this shroud has been modified for fitment)
    2:23 Apply a few drops of glue to be sure the shroud will stay on
    2:50 Remove all finger prints using a fine cloth
    3:00 If you want, apply some butyl to make sure the headlight will be free of moisture
    3:20 Press the lens on the housing and bake it again
    3:48 Now that the sealant is soft, press the lens on the housing using pliers and secure the lens by placing the metal clips
    4:17 Place the solenoid plug back on the wires
    4:25 Connect the H7 high beam splitter for the solenoid to function together with the H7 halogen high beam
    4:49 Drill a 20-22mm hole in the bulb cap to guide the wires through
    5:16 The wires will be connected to the ballast and H7 low beam plug. Because the Audi A4 B7 has Canbus, this is the only wiring setup that can be used
    5:22 Insert the bulb in the projector and secure it with the clip
    5:48 Connect the 12V ballast wires correctly, red to the yellow cable (+ positive) and black to brown (- negative)
    6:07 Click the cap back on, you are ready to do mount the headlight to the car and enjoy a luxurious Bi-xenon projector headlight! :-)

    info@retrofitlab.com
    +31 (0)341-820220

    Retrofitlab.com
    Tolweg 2W
    3851SK Ermelo
    Netherlands

    http://www.retrofitlab.com/projector-…



    How to make a “FOUR BLOCK” Rocket Stove! Easy DIY. Four concrete blocks is all it takes to make it!. Cost $5.16. video shows you how to put it together. the stove funnels all its heat up under the bottom of the pan. uses very little fuel. fueled by small sticks, twigs and leaves. cooks great. wind and rain resistant

    This supplier's raw material quality is stable and reliable, has always been in accordance with the requirements of our company to provide the goods that quality meet our requirements.




    5 Stars By Janet 2015-10-31 13:33
    Superb technology, perfect after-sales service and efficient work efficiency, we think this is our best choice.


















    5 Stars By Maggie 2016-5-30 19:39

    Send your message to us:

    INQUIRY NOW
    • * CAPTCHA: Please select the Truck

    Related Products

    INQUIRY NOW
    • * CAPTCHA: Please select the Key

    INQUIRY NOW
    • * CAPTCHA: Please select the Plane